行業資訊

瀝青的用途以及使用的注意事項

來源：http://seatostar.com/ 日期：2023-02-08

瀝青是建筑工程中經常需要用到的，但對于非專門的認識來說，可能對瀝青并不了解。對此下面濟南瀝青生產廠家來講解下瀝青的用途以及使用的注意事項。

Asphalt is often used in construction engineering, but for non-specialized understanding, it may not be understood. For this, Jinan asphalt manufacturer will explain the use of asphalt and precautions for use.

一、瀝青的用途有哪些？

1、 What are the uses of asphalt?

瀝青的主要用途是防水和防腐。因為瀝青屬于高粘度液體，性能比較突出，而且還可以和不同的礦質材料合成，所以被廣泛的用于屋面防水、地面防水以及木材、鋼材的防腐。另外，瀝青有煤焦型、石油型和天然型三種，因為性能各異，所以用戶需要根據實際情況進行選擇。

The main use of asphalt is waterproof and anti-corrosion. Because asphalt is a high-viscosity liquid with outstanding performance and can be synthesized with different mineral materials, it is widely used for roof waterproof, ground waterproof and wood and steel anti-corrosion. In addition, there are three types of asphalt: coal coke type, petroleum type and natural type. Because of their different performance, users need to choose according to the actual situation.

二、使用瀝青需要注意什么？

2、 What should I pay attention to when using asphalt?

1、瀝青在施工之前，需要先檢查基層情況，如果基層凹凸不平，需要先將基層鏟平或者補平，這樣才能確保瀝青鋪貼均勻。另外，在瀝青施工之前，還需要將基層處理干凈，條件比較惡劣的話，建議用水沖洗干凈，確保瀝青的附著性。

1. Before asphalt construction, it is necessary to check the condition of the base course. If the base course is uneven, it needs to be leveled or patched first to ensure that the asphalt is evenly paved. In addition, before asphalt construction, it is also necessary to clean the base course. If the conditions are bad, it is recommended to wash it with water to ensure the adhesion of asphalt.
濟南瀝青生產廠家

2、瀝青施工的時候，可以采用攤鋪機，這樣施工效果會比較好。使用攤鋪機的時候，需要提前對設備進行預熱，確保溫度在100攝氏度以上，并且還要提前計算好瀝青和厚度，并對設備進行調整，這樣才能保證瀝青層厚度均勻。

2. During asphalt construction, the paver can be used, so the construction effect will be better. When using the paver, it is necessary to preheat the equipment in advance to ensure that the temperature is above 100 ℃, and calculate the asphalt and thickness in advance, and adjust the equipment, so as to ensure the uniform thickness of the asphalt layer.

3、瀝青需要一邊加熱一邊施工，所以在施工完畢之后，還需要有一段時間的冷卻期，注意期間內，行人不能在上面走動，更不能有車輛壓放。據專門的人士介紹，瀝青溫度低于50攝氏度，一般就可以走動了，但注意比較重的車輛還是不能行走的。

3. The asphalt needs to be heated while construction, so after construction, there needs to be a cooling period for a period of time. During this period, pedestrians should not walk on it, let alone vehicles. According to a special person, if the asphalt temperature is lower than 50 ℃, you can generally walk, but pay attention to the fact that heavy vehicles cannot walk.

因為不同情況使用瀝青，其施工方法和技巧都有所區別，所以對于沒有經驗的用戶，須要了解情況后，才能施工，如果您還想了解更多關于瀝青的相關內容，歡迎關注我們的網站http://seatostar.com。

Because asphalt is used in different situations, its construction methods and techniques are different. For inexperienced users, they need to know the situation before construction. If you want to know more about asphalt, please pay attention to our website http://seatostar.com 。

上一條：提高路面機械設備工作穩定性的措施

下一條：挖掘機租賃可以給你帶來的好處有哪些？